PowerTec
Showing 1–16 of 191 results
-
Cables
3/8″ Corrugated Jumper Cable N Male to N Female; 5m
The 3/8″ Corrugated Jumper Cable N Male to N Female, 5m is a high quality, super flexible corrugated cable of the size SF 3/8″.
It provides reliable and stable transmission of radio frequency signals in the frequency range DC to 3800 MHz. The cable is optimally shielded against interference, providing excellent, loss-free mobile communication quality for use in in-building distributed antenna systems (DAS) or in mobile communication base stations. In addition, a prefabricated coaxial jumper cable assembly SF 3/8″-50-FR N male N female 2 m is also suitable for a variety of demanding industrial applications or broadcasts.
SKU: DX87027110 -
RF Connectors
4.3-10 Male Connector for L-400 Coaxial Cable
4.3-10 RF connectors are designed to meet the extreme demands of 5G equipment, supporting very high order modulation schemes like 256QAM, wide bandwidths, and extended operating bands up to 6 GHz. 4.3-10 Male connectors are typically found on a communication system’s feeder cable.
This crimp-style 4.3-10 Male connector terminates L-400 series braided cables, such as LMR-400 and PTL-400. This model of 4.3-10 Male connector is weatherproof when mated with a compatible Female connector.
- IP65 weatherproof when mated
- IEC 61169-54 standardised 4.3-10 Male interface
- Simple crimp cable termination
- Manufactured in an ISO 9001 accredited facility
SKU: DX87021655 -
RF Connectors
Blackhawk Dummy Load / Terminator 1W SMA Male
Terminators, also known as loads or dummy loads, are used to dissipate RF energy without radiating electromagnetically. They are used to cap-off unused ports on couplers and dividers, maintaining the device’s impedance and VSWR specification.
SKU: DX87019048 -
RF Passives
Blackhawk Dummy Load / Terminator 5W N Male
Terminators, also known as loads or dummy loads, are used to dissipate RF energy without radiating electromagnetically. They are used to cap-off unused ports on couplers and dividers, maintaining the device’s impedance and VSWR specification.
The load value, in this case 5 Watts, defines the maximum amount of energy capable of being dissipated. RF energy is dissipated through thermal radiation, i.e., heat, and consequently large loads require heat-sink features.
SKU: DX87019049 -
order-in onlyRF Connectors
Bulkhead Rear Mount RF Adapter N Female to N Female
N Female to N Female bulkhead adapters are designed to mount through a surface to provide a weatherproof penetration or strain-relief when interconnecting devices. N Female Bulkhead adapters are sometimes called panel mount adapters. They are ideal for panel mounting, enclosure casing mounting, or with wall plates.
The rear bulkhead interface is chamfered to prevent twisting when mounted.
- Includes nut, rubber gasket, and shake proof shim
- Supports frequencies up to 6 GHz
- Manufactured under strict ISO 9001 procedures
- Interfaces compliant to IEC 61169-16
SKU: DX87021758 -
RF Adapters
Bulkhead Rear Mount RF Adapter SMA Female to SMA Female
SMA to SMA Female panel-mountable bulkhead adapters are designed to interconnect two SMA Male coaxial cables through a mounting surface. Surfaces often include cabinets, weatherproof boxes, or industrial machinery.
A rubber o-ring seal is used to prevent water and dust ingress. The panel bulkhead adapter is secured in place with the supplied hex nut and locking washer.
This model adapter has been sourced to provide extended performance to 6 GHz, permitting use on 5G FR1 bands and 5 GHz wireless applications.
SKU: DX87021757 -
Tools
Cable Stripper L-195 / L-240 – 2 Blade
Easy to use Cable Stripper for preparing coaxial cable for RF connector termination.
- Suitable for LMR195 / LMR240 / RG58 / RG213 / RG6 / RG59 / RG62 / RG174
- Stripping distance is adjustable
- Suits cable sizes: 4-12mm
- 2 blades
The two blades strip back the cable jacket and dielectric to pre-set stripping dimensions to cut down the time to terminate a coaxial cable connector.
SKU: DX87021711 -
RF Adapters
Coaxial Cable SMA Female Connector for RG-58 / L-195
- The SMA Female Connector for RG-58/ L-195 Coaxial Cable is designed for an ordinary crimp and solder attachment.
- It is also suitable for equivalent series braided coaxial cables.
- SMA connectors have become the mainstay of wireless technologies thanks to their modest durability and very compact size.
- The SMA Female connector can be identified by its small body comprising almost entirely of its outer thread.
- Its centre receptacle is encased in dielectric which both sit recessed from the front of the interface.
SKU: DX87021687 -
RF Adapters
Coaxial Cable SMA Male Connector for RG-58 / L-195
SMA connectors have become the mainstay of wireless technologies thanks to their modest durability and very compact size. The SMA Male connector can be identified by its hex-shaped outer body which rotates to interface by its inner thread. A gold pin protrudes from the centre of the connector which upon threading together couples with the receptacle on the female connector.
This straight-bodied SMA Male connector is designed for an ordinary crimp and solder attachment to RG-58 and LMR-195 and equivalent series braided coaxial cables.
- Supports frequencies up to 6 GHz
- Suits all L-195 and RG-58 series coaxial cables
- 5.4 mm (.213″) hex die crimp attachment
- Interface compliant to IEC 61169-15
SKU: DX87021730 -
Tools
Crimp tool for RG-58 / L-240 / L-400
This ratchet cable crimper is the ideal tool for field terminations of coaxial connectors for the main cable types used for wireless communications.
This one single tool has a hex die designed for terminating the following main cable types (among others):
- LMR-400: 0.429″ (10.89 mm)
- LMR-240: 0.255″ (6.48 mm)
- LMR-195: 0.213″ (5.4 mm)
Operation is simple, prepare the coaxial cable connector and use the ratchet crimp to press the ferrule down, swaging the outer conductor between connector body and ferrule.
SKU: DX87021721 -
order-in onlyDeployable Systems, In-building Coverage
DAS Rack Cabinet 18RU 3 Shelf Kit
Designed for commercial applications the Powertec DAS Rack Kits provide a professional and modular way of mounting clustered Cel-Fi GO units in a communications room.
Our design team will provide a plan for each system according to the customers’ requirements. We can also offer remote monitoring and support plans.
The Powertec DAS Rack Cabinet 18RU 3 Shelf Kit is mounted in an 18RU Rack and can accommodate 1-9 GO units. They are designed for the GO4 model with the ability to remotely manage and monitor the system.
SKU: DX87021867 -
order-in onlyDeployable Systems, In-building Coverage
DAS Rack Cabinet 6RU 1 Shelf Kit
Designed for commercial applications the Powertec DAS Rack Kits provide a professional and modular way of mounting clustered Cel-Fi GO units in a communications room.
Our design team will provide a plan for each system according to the customers’ requirements. We can also offer remote monitoring and support plans.
The Powertec DAS Rack Cabinet 6RU 1 Shelf Kit is mounted in a 6RU Rack and can accommodate 1-3 GO units. They are designed for the GO4 model with the ability to manage and monitor the system remotely.
For more information or to discuss purchasing this product please fill out the form below.
SKU: DX87021865 -
order-in only
-
RF Adapters
FME Male Connector for RG-58 Coaxial Cable
While less popular than modern types, FME connectors can still be found throughout a range of low-frequency applications including UHF and 3G technologies.
This FME Male crimp connector is used to terminate RG-58 and LMR-195 (or equivalent) series braided coaxial cables.
The connector has a male body with an internal thread and protruding pin.
This couples with the FME female counterpart which can be identified by the rotatable external thread.
SKU: DX87021698 -
Cables
L-100 Patch Cable RP-SMA Male to SMA Female – 15 cm
SMA Female to RP-SMA Male patch cables are very short coaxial cables. They are designed to sit between a larger feeder cable and the end device thus providing flexibility and strain relief to prevent damage to the equipment.
The cable’s RP-SMA Male connector is designed to screw on to WiFi devices which use the Reverse-Polarity SMA interface type.
The SMA Female is a rear-mount bulkhead connector which in addition to connecting to the larger cable also allows integration of the patch cable into an enclosure or mounting frame.
SKU: DX87021789