Masts & Towers
Showing 1–16 of 34 results
-
Masts & Towers
Blackhawk AL220 Portable Hinged Tripod Lattice Tower; 4.7m
The tripod-base aluminium lattice towers are manufactured locally in Queensland. They are an ultra-lightweight structure this portable system can be set up in a matter of minutes. This allows instant height anywhere – no footing required. The bolt-together design means an easy shipment to site, and the super-lightweight design allows hand-raising and lowering of the tower eliminating the need for tower climbs.
Features:
- Lightweight hand-raised design
- An aluminium tripod outrigger base
- 4.7 m total height (3.1 m lattice)
- 220 mm wide body (180 mm faced)
- 3100 mm section lengths
- Solid aluminium billet hinge
- Low maintenance aluminium construction
SKU: DX87028056 -
Masts & Towers
Blackhawk AL220 Portable Tripod Lattice Tower
Freight is additional, please contact us for a quote.
Introducing the Blackhawk range of portable towers. To help our valued network of Australia-wide installers, we’ve introduced a range of transportable, quick-deployed towers to ensure your team has the hardware to keep up with technology’s rapid pace.
FEATURES:
- Lightweight, easy to raise
- Heavy-duty galvanised tripod base
- Three-metre outriggers
- 1000 kg rated outrigger legs
- 1.5-tonne winch included
- <1 hour construction time
- Available in 8m and 11m
- AL330 and AL500 towers are available in 8 – 21m lengths upon request
Portable towers are nothing short of a revolution for the wireless industry. Installing a small telecommunications tower can quickly add tens of thousands of dollars to your project budget, and months to your commissioning time frame. By contrast, Blackhawk’s portable towers are a low cost, off-the-shelf item, shipped by courier anywhere in Australia.
SKU: DX87035128 -
order-in onlyMasts & Towers
Blackhawk Aluminium J Pole 1.8m
This J-Pole has been designed as a versatile antenna mount, suitable for use with any style of antenna. It can be mounted on the roof, wall or any other flat vertical service.
Features:
- 1.8 m mast length, 32 mm pole diameter
- J-Pole or “Hockey Stick” curved design to provide clearance around drainage gutters.
- All-aluminium construction
- Locally manufactured in Sunshine Coast, Queensland
- Mounting plate with pre-drilled holes for easy installation
SKU: DX87030531 -
order-in onlyMasts & Towers
Blackhawk Galvanised Collared Roof Mast; 76 mm Pole Diameter
GC76 roof masts are a heavy-duty mounting platform for a range of large antennas, microwave dishes, sensors, and mmWave systems. GC76 is typically used as a base station roof mount for point to point, microwave, 4G-5G small cells, and other movement-sentitive technologies.
FEATURES:
- The collared design incorporates two sliding collars, allowing stay bars to be attached to the centre mast, locked into place with large M12 bolts
- Designed for operation in even the most extreme environments, this mast has three large footplates designed to secure in place using 6 to 12 roof screws.
- The footplate has a hinged design allowing pitch compensation for standard corrugated iron and tin roofs.
- 76mm galvanised steel roof poles are available for a serious, low deflection mounting platform that ensures your RF system resists even the most intense of weather conditions.
SKU: DX87035131 -
order-in onlyMasts & Towers
Blackhawk Galvanised/Stainless Wall Mount Mast; 48 mm Pole
Freight is additional. Please contact us for a quote.
GM48W is a subseries of APAC’s GC48 mast system, staybars can be added to increase stability. This subseries is designed for wall mounting and uses two stainless steel stand-off mounts to attach to the wall. The bottom stand-off mount acts as a hinge, allowing equipment to be serviced safely, and the top mount is used to lock and secure the centre pole in place.
With its 48 mm diameter pole, the GM48W wall mounted mast is ideal for installing equipment parallel to a vertical surface. The stand-off mounts provide a horizontal offset to prevent the pole obstructing the roof guttering.
The standard horizontal offset is 200 mm, but can be customised to your desired dimension.
FEATURES:
- Designed for applications requiring high stability
- Suitable for concrete, steel, wooden walls
- Galvanised 48 mm (OD) pole, heights up to 3 metres
- Stainless base plates, corrosion-resistant
- Zinc fasteners with nylocs
- 100% Australian made
SKU: DX87035133 -
-
order-in only
-
order-in only
-
order-in onlyMasts & Towers
Blackhawk Screw Down Galvanised Roof Masts
Freight is additional, please contact us for a quote.
The Blackhawk Roof Masts are a range of budget masts for quick, low-cost installations. Despite its simplicity, this design is quick and effective and most importantly low cost. The footplate has a hinged design allowing pitch compensation for standard corrugated iron and tin roofs. The pole diameter is available in 32mm and 48mm.
FEATURES:
- Entry-grade, low-cost roof mast
- Galvanised 48 mm (OD) pole, various heights
- Screw-together design
- Roof pitches up to 45 degrees
- 100% Australian made
SKU: DX87035165 -
order-in onlyMasts & Towers
GC48 Series Galvanised Steel Headframe 4 Sector
GC48 headframes are designed to attach to the top of the GC48 series 48 mm diameter steel roof mast. This four sector headframe slips over the top of the GC48 centre pole and secures into place using M12 set/grub screws.
Each 900 mm vertical mount is constructed from 48.3 mm diameter galvanised steel tube and fully welded to a 60.3 mm centre column via 400 mm length 48.3 mm CHS stand-offs to provide a high degree of rigidity and minimal deflection/torquing. Measurements are identical to the 2-Sector and 3-Sector variants to allow easy interchange.
- Four 900 mm uprights at 0°, 90°, 180°, 270°
- Spaced 400 mm from the centre mast
- Heavy duty galvanised steel
- Designed for any GC48 Series Roof Mount
SKU: DX87022354 -
order-in onlyMasts & Towers
GC48 Series Galvanised Steel Headframe, 3 Sector
GC48 headframes are designed to attach to the top of the GC48 series 48.3 mm diameter steel roof mast. This three sector headframe slips over the top of the GC48 centre pole and secures into place using M12 set/grub screws.
Each 900 mm vertical mount is constructed from 48.3 mm diameter galvanised steel tube and fully welded to a 60.3 mm centre column via 400 mm length 48.3 mm CHS stand-offs to provide a high degree of rigidity and minimal deflection/torquing. Measurements are identical to the 2-Sector and 4-Sector variants to allow easy interchange, and match the GC76 series dimensions.
- Three 900 mm uprights at 0°, 120°, 240°
- Spaced 400 mm from the centre mast
- Heavy duty galvanised steel
- Designed for any GC48 Series Roof Mount
SKU: DX87022355 -
order-in onlyMasts & Towers
GC76 Series Galvanised Steel Headframe 3 Sector
GC76 headframes are designed to attach to the top of the GC76 series 76 mm diameter steel roof mast. This three sector headframe slips over the top of the GC76 centre pole and secures into place using M12 set/grub screws.
Each 900 mm vertical mount is constructed from 48 mm diameter galvanised steel tube and fully welded to an 89 mm centre column via 400 mm length 48 mm CHS stand-offs to provide a high degree of rigidity and minimal deflection/torquing. Measurements are identical to the 2-Sector and 4-Sector variants to allow easy interchange.
- Three 900 mm uprights at 0°, 120°, 240°
- Spaced 400 mm from the centre mast
- Heavy duty galvanised steel
- Designed for any GC76 Series Roof Mount
SKU: DX87022353 -
order-in onlyMasts & Towers
GC76 Series Galvanised Steel Headframe 4 Sector
GC76 headframes are designed to attach to the top of the GC76 series 76mm diameter steel roof mast. This four sector headframe slips over the top of the GC76 centre pole and secures into place using M12 set/grub screws.
Each 900 mm vertical mount is constructed from 48 mm diameter galvanised steel tube and fully welded to an 89 mm centre column via 400 mm length 48 mm CHS stand-offs to provide a high degree of rigidity and minimal deflection/torquing. Measurements are identical to the 2-Sector and 3-Sector variants to allow easy interchange.
- Four 900 mm uprights at 0°, 90°, 180°, 270°
- Spaced 400 mm from the centre mast
- Heavy duty galvanised steel
- Designed for any GC76 Series Roof Mount
SKU: DX87022444 -
order-in onlyMasts & Towers
GT1000 Galvanised Free Standing Lattice Tower
Freight is additional, please contact us for a quote.
These modular free-standing galvanised steel lattice towers are manufactured locally in Queensland. These come in 6.0 metre, 350 kg sections that will permit comfortable handling during transport and assembly.
This tower module is a stackable design, to build towers up to 30 metres (five sections).SKU: DX87035205