RF Connectors
Showing 1–16 of 22 results
-
RF Connectors
4.3-10 Male Connector for L-400 Coaxial Cable
4.3-10 RF connectors are designed to meet the extreme demands of 5G equipment, supporting very high order modulation schemes like 256QAM, wide bandwidths, and extended operating bands up to 6 GHz. 4.3-10 Male connectors are typically found on a communication system’s feeder cable.
This crimp-style 4.3-10 Male connector terminates L-400 series braided cables, such as LMR-400 and PTL-400. This model of 4.3-10 Male connector is weatherproof when mated with a compatible Female connector.
- IP65 weatherproof when mated
- IEC 61169-54 standardised 4.3-10 Male interface
- Simple crimp cable termination
- Manufactured in an ISO 9001 accredited facility
SKU: DX87021655 -
-
RF Connectors
Blackhawk Dummy Load / Terminator 1W SMA Male
Terminators, also known as loads or dummy loads, are used to dissipate RF energy without radiating electromagnetically. They are used to cap-off unused ports on couplers and dividers, maintaining the device’s impedance and VSWR specification.
SKU: DX87019048 -
order-in onlyRF Connectors
Bulkhead Rear Mount RF Adapter N Female to N Female
N Female to N Female bulkhead adapters are designed to mount through a surface to provide a weatherproof penetration or strain-relief when interconnecting devices. N Female Bulkhead adapters are sometimes called panel mount adapters. They are ideal for panel mounting, enclosure casing mounting, or with wall plates.
The rear bulkhead interface is chamfered to prevent twisting when mounted.
- Includes nut, rubber gasket, and shake proof shim
- Supports frequencies up to 6 GHz
- Manufactured under strict ISO 9001 procedures
- Interfaces compliant to IEC 61169-16
SKU: DX87021758 -
order-in onlyRF Connectors
N Female Connector for L-400 Coaxial Cable
The N Female connector can be identified by its thick, medium-sized body which has an outer thread. The centre receptacle is thicker than many other connector types and is air-gapped from the outer body with no insulating mechanism. It sits naturally recessed inside the body.
N connectors remain popular throughout a range of wireless applications including UHF, 3G, 4G LTE, and WiFi technologies. Also referred to as the N-Type connector, the design is durable with good power handling characteristics.
This N Female crimp connector is used to terminate LMR-400 (or equivalent) series braided coaxial cables
SKU: DX87021694 -
RF Connectors
N Female Connector for RG-58 / L-195 Coaxial Cable
N connectors stay popular throughout a range of wireless applications including UHF, 3G, 4G LTE, and WiFi technologies.
Also referred to as the N-Type connector, the design is durable with good power handling characteristics.
The N Female connector is identified by its thick, medium-sized body which has an outer thread.
The centre receptacle is thicker than many other connector types and is air-gapped from the outer body with no insulating mechanism.
This N Female crimp connector is used to terminate RG-58 and LMR-195 (or equivalent) series braided coaxial cables.
SKU: DX87021695 -
RF Connectors
N Male Connector for L-240 Coaxial Cable
N connectors remain popular throughout a range of wireless applications including UHF, 3G, 4G LTE, and WiFi technologies. Also referred to as the N-Type connector, the design is durable with good power handling characteristics.
The N Male connector is one of the most popular connectors for coaxial cables as many large antennas, WiFi access points and PTP radios use the corresponding Female interface. It can be identified by the medium sized rotating body which contains an inner thread. Its gold pin is separated from the outer body with a protective metal shroud.
This N Male crimp connector is used to terminate LMR-240 (or equivalent) series braided coaxial cables, such as Powertec PTL-240 cable.
The connector’s coupling nut is supplied standard in finger-grip format.
- Supports frequencies up to 6 GHz
- Suits all L-240 series coaxial cables
- 6.5 mm (.255″) hex die crimp attachment
- Interface compliant to IEC 61169-16
SKU: DX87021690 -
RF Connectors
N Male Connector for L-400 Coaxial Cable
N connectors remain popular throughout a range of wireless applications including UHF, 3G, 4G LTE, and WiFi technologies. Also referred to as the N-Type connector, the design is durable with good power handling characteristics.
The N Male connector is one of the most popular connectors for coaxial cables as many large antennas, WiFi access points and PTP radios use the corresponding Female interface. It can be identified by the medium sized rotating body which contains an inner thread. Its gold pin is separated from the outer body with a protective metal shroud.
This N Male crimp connector is used to terminate LMR-400 (or equivalent) series braided coaxial cables. The connector’s coupling nut is supplied standard in finger-grip format.
SKU: DX87021691 -
RF Connectors
N Male Connector for RG-58 / L-195 Coaxial Cable
N connectors remain popular throughout a range of wireless applications including UHF, 3G, 4G LTE, and WiFi technologies. Also referred to as the N-Type connector, the design is durable with good power handling characteristics.
The N Male connector is one of the most popular connectors for coaxial cables as many large antennas, WiFi access points and PTP radios use the corresponding Female interface. It can be identified by the medium sized rotating body which contains an inner thread. Its gold pin is separated from the outer body with a protective metal shroud.
This N Male crimp connector is used to terminate RG-58 and LMR-195 (or equivalent) series braided coaxial cables. The connector’s coupling nut is supplied standard in finger-grip format.
SKU: DX87021693 -
order-in onlyRF Connectors
RF Adapter N Female to N Male Right Angle
This N Female to N Male Right Angle Adapter connects an N Female cable to an N Male cable with a sharp 90 degree bend. They can also be used to reduce the space required to bend coaxial cable, particularly thick cables with large bend radii.
With an operating frequency range up to 6 GHz it is suitable for UHF radio, WiFi, 4G-5G (excluding mmWave), LPWANs, and more.
Features:
- Suitable for frequency ranges from DC to 6 GHz
- < 0.1 dB Insertion Loss
- Better than 1.2:1 VSWR
- Knurled body for quick install
SKU: DX87021771 -
RF Connectors
RF Adapter N Female to SMA Female
The N Female to SMA Female straight bodied adapter is an ordinary coaxial component designed to connect a Male N-Type interface to a Male SMA interface.
This model has been custom designed to support an extended frequency range to 6 GHz.
Features:
- Made from brass
- Standard N Female interface integrated directly to an SMA Female interface
SKU: DX87021733 -
RF Connectors
RF Adapter N Female to SMA Male
The N Female to SMA Male straight bodied adapter is an ordinary coaxial component designed to connect a Male N-Type interface to a Female SMA interface. This model has been designed to support an extended frequency range to 6 GHz.
Manufactured from finely machined brass, the adapter has a standard N Female interface on one end, integrated directly to an SMA Male interface. The SMA Male’s nut spins freely for threading onto its female counterpart.
Features:
- SMA Male to N Female Adapter
- Supports frequencies up to 6 GHz
SKU: DX87021692